Maximo Basic- Asset Module

 Asset Module

2. Asset Module.

 I. Asset application:-  This application is use to create asset record and respective details such as parent, status, location, vendor and maintenance cost for each and every asset to store.

II. Asset template:- Asset template use to create a template to specify common details of asset that can be apply to multiple assets. You can define meters, meter group, spare parts and respective specification.

III. Locations:- Locations application use to track the assets for specific location. Location can be physical or virtual. Location is useful to find the movement of any asset.

Note:- It's always beneficial to define hierarchy of system and network. So, easily you can track your asset.

IV. Meters:- Meter application use to create or modify the meter details. You can associate one or multiple meters to asset or location to track the performance.

There are 3 types of meter available in maximo.

      a. Continuous meter:-  This meter reading is always increasing over time unless it'sget reset manually. For example milage meter in car or bike.

      b. Gauge meter :- Gauge meter is the meter where numeric reading fluctuate over the time. For example tyre pressure meter in car.

      c. Characteristic meter:- This meter use to observ the characteristic. For example to check the oil quality.

V. Meters group:- This application use to group similar type of meter and later can be used in asset and location application.

VI. Relationship:- Relationship application use to describe the relationship between assets or asset and location. It can be either unidirectional or bidirectional.

VII. Condition monitoring:-  This application use to define the acceptance limit of asset based on organization  requirements and based on the define limits system can initiate preventive or emergency management of that asset.

Note:- You can setup crontask to generate workorder automatically  based on defined condition of asset.

VIII. Failure code:- You can use this application to define the hierarchy of failure code for your organization asset. It can help you to analyse the history of asset failure history and define the suitable preventive Maintenance schedule in the system.

**Please provide your comment and suggestions on this post.**